E310T1-1/4 FLUX-CORED WIRE
CLASSIFICATION
AWS 5.22 Class E310T1-1/4 / ASME SFA A5.22 Class E310T1-1/4
UNS W31031 A#9 F#6
DESCRIPTION
E310T1-1/4 is a gas shielded flux-cored wire designed for “all-position” welding and can be used with 75%Ar / 25%CO2 or 100% CO2 shielding gas.
Welding parameters must be optimized to avoid hot cracking.
APPLICATIONS
E310T1-1/4 is most often used for welding base metals of similar compositions such as AISI 310 steels.
E310T1-1/4 can be used for welding carbon steel to stainless steel.
E310T1-1/4 can be used for welding or repairing high alloy heads and corrosion resistant castings of the same general composition.
Use low heat input – Suggest 30,000 Joules/In Maximum.
Avoid concave weld beads
Keep interpass temperature under 250°F
Fill all start and stop craters to avoid crater cracks.
TYPICAL CHEMISTRY (%)
C |
Cr |
Ni |
Mo |
Mn |
Si |
P |
S |
Cu |
.10 |
25.9 |
20.4 |
.10 |
1.4 |
.82 |
.015 |
.005 |
.08 |
TYPICAL MECHANICAL PROPERTIES
TENSILE STRENGTH |
89,000 PSI |
ELONGATION IN 2” |
38% |
HEAT TREATMENT |
NONE |
Note: Mechanical properties shown using 100% CO2
OPTIMUM TYPICAL WELDING PARAMETERS (using 100% CO2)
.045” DIA. |
FLAT & VERTICAL |
FLAT ONLY |
AMPS |
130-190 |
120-250 |
VOLTS |
24-29 |
25-29 |
WFS (IPM) |
225-450 |
200-600 |
NOTE: Stick out 3/8”-1/2”
Lower volts by 2 when using 75%Ar / 25%CO2
Mobile:+86-13587457912
Tel:+86-577-62511132
Email:info@tyuelec.com
Add:Building 2, Butterfly Plaza, Yueqing City, Zhejiang Province, China